When it comes to removing a Molex connector, having the right tools and materials on hand is crucial. They are designed to withstand high temperatures, vibrations, and moisture, ensuring reliable performance in challenging conditions. The connectors also have a locking mechanism to ensure a secure and reliable connection, preventing accidental disconnection.įurthermore, Molex connectors are known for their durability and resistance to various environmental factors. This allows for different types of connection configurations, such as male-to-female, male-to-male, and female-to-female. Molex connectors also have a variety of contact configurations, including pins, sockets, and blends of both. The connectors can be easily plugged and unplugged, making them convenient for both manufacturing and maintenance purposes. This means that you can easily connect and disconnect multiple connectors without the need for soldering or specialized tools. One of the key features of Molex connectors is their modular design. The connectors are designed to handle a wide range of voltages and currents, making them suitable for various electrical applications. They are known for their compact size, which allows for space-saving designs in electronic devices. Molex connectors are typically found in computer systems, mobile devices, automotive applications, and industrial machinery. These connectors consist of a male and female component that securely join together, providing a secure connection for power and signal transmission. They are a type of electrical connector known for their reliability, versatility, and ease of use. Molex connectors are widely used in various electronic devices and applications. Step-by-Step Guide for Removing Molex Connector.Removing the wires without damaging the connectors is a simple method of enabling users to switch the polarity of actuator wires without needing to obtain additional Molex connectors or Molex housing. Once the header pins push back the hooks, Molex connector pin removal is simple, and the wire can slide out of the housing by pulling back on it without causing any damages to the power connector. This is completed by pushing the header pin into the thin gap between the metal power connector and the plastic on both sides of the housing. In this tutorial, we are using flat header pins that are used to release the hooks. Since there are two hooks keeping the connectors in place within the housing, they will need to be pushed back to release the wires. Part 3: Removing Wires with Crimped Power Connectors from a Housing

However, there is a method of removing the wire from the housing without damaging the power connector. Once the crimped wire has been inserted into the housing, it will be difficult to remove. The power connectors have hooks that allow the connectors to latch into the connector housing. To disconnect a Molex connector (male and female connection), simple press down on outside clip and pull the connectors apart. Try crimping the wire again and inspect the crimp before inserting it into the housing. If the power connector pulls out or the wire comes loose, it means that your crimp was faulty. There are two housing options available, namely, a male housing (female power connectors) and a female housing (male power connectors). For example, a Progressive Automations control box may require the actuator wires to have a designated orientation to obtain an extend and retract sequence that correlates to the ‘up’ or ‘down’ activation buttons on a wireless remote. The orientation of the wires can be based strictly off preference and will depend on the Molex wiring required for the type of system that you are working with. The crimped wires can now be fed into the connector housing.

Part 2: Adding Wires with Crimped Power Connectors to the Connector Housing Clamp down on the crimping tool and release.Įnsure the correct power connector is crimped onto the wire depending on if you use Molex connectors that are male or female. With the stripped wire inserted into the un-crimped power connector, load it into the crimping tool.Īlternatively, insert the un-crimped power connector into the crimping tool without the wire, and then feed the wire into the connector (either way works). Therefore, the optimal length of exposed wire is 2.5 mm (the length of the crimp zone). The amount of exposed wire should not exceed the length of the power connectors insulation and crimp zone, which is 5mm.

Part 1: Stripping the Wire and Adding the Power Connectorsīegin by using a wire stripping tool to strip back enough wire, ensuring proper connection when crimping on the power connectors.

Female molex connector